There are a number of different types of asphalt cracks that can form; the most common being:
For best results, asphalt crack filling in Joliet should be done as soon as cracks start forming. If left unchecked, water will begin to make its way in and erode the layers, forming bigger cracks, potholes, and ultimately, total deterioration. Crack filler provides the protection needed to stop water from penetrating the surface, thereby vastly slowing deterioration.
Cracks can be sealed with one of two methods: cold applied or hot pour. Cold applied crack filling uses an emulsion that’s applied at ambient temperatures, usually in driveways and parking lots. Hot pour crack filling has a quick set time and involves applying heated up rubberized aggregate in to cracks in roadways and parking lots.
Sealcoating and Asphalt Joliet has many years of experience in crack filling, as well as asphalt paving and sealcoating in Joliet, IL. Call or request a quote for a free crack inspection!
- Block: a square area of cracking caused by dry aggregate. An overlay is usually needed to repair block cracks.
- Transverse: perpendicular cracking, usually in high-traffic areas, caused from overuse or very low temperatures. These are remedied with crack filling.
- Slippage: crescent-shaped cracks that are generally precursors to potholes, and caused when the sand content in the aggregate is too high. Patching is needed to correct slippage cracks.
- Reflective: cracks that extend from the base to the top layer of pavement. These can be fixed with filler.
- Fatigue/Alligator: cracks that resemble alligator skin that are caused by incorrect foundation installation, poor drainage, severe weather, to too much weight over one area for a prolonged time. Deeper patching is often used to repair these types of cracks.
- Edge: cracks that form along the edge of a surface from poor drainage or support, heaving, or insufficient setting time during install. Once debris is removed, cracks can be filled with sealant.
- Longitudinal: linear cracks usually formed at the joint structure of road lanes that can be filled with sealant.
For best results, asphalt crack filling in Joliet should be done as soon as cracks start forming. If left unchecked, water will begin to make its way in and erode the layers, forming bigger cracks, potholes, and ultimately, total deterioration. Crack filler provides the protection needed to stop water from penetrating the surface, thereby vastly slowing deterioration.
Cracks can be sealed with one of two methods: cold applied or hot pour. Cold applied crack filling uses an emulsion that’s applied at ambient temperatures, usually in driveways and parking lots. Hot pour crack filling has a quick set time and involves applying heated up rubberized aggregate in to cracks in roadways and parking lots.
Sealcoating and Asphalt Joliet has many years of experience in crack filling, as well as asphalt paving and sealcoating in Joliet, IL. Call or request a quote for a free crack inspection!